Air 486PH Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 48

Air 486PH Скачать руководство пользователя страница 38

Default Setup Window

The Default Setup windows has following options. Every option in
BIOS Setup contains two default values: a Fail-Safe default and the
Optimal default value.

Original Defaults

Restores old values of setup if user decides to abandon changes.

Optimal Defaults

The   Optimal   default   values   provide   optimum   performance
settings for all devices and system features.   If onboard SCSI,
floppy   controller,   I/O   controller   are   used   in   the   system,   the
Optimal default setting should be loaded to simplify the CMOS
setup process.

Fail-Safe Defaults

The   Fail-Safe   default   settings   consist   of   the   safest   set   of
parameters.     Use   them   if   the   system   is   behaving   erratically.
They should always work but do not provide optimal  system
performance characteristics.
Once   this   option   is   loaded,   user   should   go   back   to   the   first
selection setup menu to manually select other options.

«
...
36
37
38
39
40
...
»

Содержание 486PH

















































Отзывы:

Нет отзывов