Air 486PH Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 48

Air 486PH Скачать руководство пользователя страница 2

PREFACE

Thank   you   for   purchasing   the   486PH   system   board.     This
document will aid you to configure and to install this system
board   properly.   The   document   is   prepared   with   our   best
knowledge;   however,  we  make   no  representation  or  warranty
concerning the contents or use of this manual, and specifically
disclaim any expressly implied warranties or merchant ability or
fitness   of   any   particular   purpose.     The   information   in   this
document is subject to change without notice.

This document contains information protected by copyright. All
rights are reserved. No part of this document may be used or
reproduced in any form or by any means, or stored in a database
or retrieval system, without prior written permission.

Trademarks

.

Intel is a registered trademark of Intel Corporation.

.

IBM is a registered trademark of International Business
Machines Corporation.

.

Microsoft is a registered trademark of Microsoft
Corporation.

.

PCI is a registered trademark of PCI Special Interest
Group.

.

All other trademarks used in this manual are the property of
their respective owners.

«
1
2
3
4
...
»

Содержание 486PH

















































Отзывы:

Нет отзывов