4.
Web Management
AirLive AirMax4GW User’s Manual
55
Enrollee Mode
4.
WPS Trigger [Registrar Mode]
: Press this button to simulate you have
push WPS button and let wireless clients to connect to this gateway in WPS
PBC mode.
5.
Allowed STA PIN Code [Registrar Mode]
: Fill the PIN code of device, so all
STA clients can operate the WPS process to the device with the certificated
code.
6.
AP PIN Code & New Generate [Enrollee Mode]
: This PIN number is required
for WiFi client during WPS connection. You can press “New Generate” to get
a new AP PIN.
7.
WPS status
: According to your setting and activity, the status will show
“IDLE”, “STARTPROCESS”, or “NOT USED”. The status is “IDLE” by default.
If you want to start a WPS connection, you need to push “Trigger” button to
change its status to “STARTPROCESS”. Only one wireless client is allowed
for each WPS connection.
If you want to start a WPS connection, you can click on the “
Trigger
” button of
this device to change the WPS status to “STARTPROCESS” and then initiate
the WPS process on other wireless client devices in two minutes to make the
client device connected to the activated WLAN.
4.1.3.2 Wireless Client List
In
“Wireless Client List”
page, the list of connected wireless clients will be shown
consequently. You can choose to see “All” of connected wireless clients, or you can
4
indicate which virtual AP (SSID) you want to browse. You can check wireless clients of
VAP-1~VAP-8 individually.