4.
Web Management
AirLive AirMax4GW User’s Manual
97
•
Site to Site – Support Full Tunnel Application
When Full Tunnel function of remote Business Security Gateway is enabled,
all data traffic from remote clients behind remote Business Security Gateway
will goes over the VPN tunnel. That is, if a user is operating at a PC that is
in the Intranet of remote Business Security Gateway, all application packets
and private data packets from the PC will be transmitted securely in the VPN
tunnel to access the resources behind local Business Security Gateway,
including surfing the Internet. As a result, every time the user surfs the web
for shopping or searching data on Internet, checking personal emails, or
accessing company servers, all are done in a secure way through local
Business Security Gateway.
4.2.3.2.2 IPSes Configuration
1.
IPSec:
You could trigger the function of IPSec VPN if you check “Enable” box.
2.
NetBIOS over IPSec:
If you would like two Intranets behind two Business
Security Gateways to receive the NetBIOS packets from Network
Neighborhood, you have to check “Enable” box.
3.
NAT Traversal:
Some NAT routers will block IPSec packets if they don’t
support
IPSec pass through. If your Business Security Gateway connects to this
kind of NAT router which doesn’t support IPSec pass through, you need to
activate this option in your Business Security Gateway.
4.
Max. Tunnels:
The device supports up to 32 IPSec tunnels, but you can
specify it with the number of maximum current activated IPSec tunnels that
is smaller or equal to 32.
5.
You can add new, edit or delete some IPSec tunnels in Tunnel List & Status
as follows.