Air Lift LoadLifter 5000 Ultimate, Руководство по установке

Страница: 10 / 28

LoadLifter 5000 Series
MN-1053 8
5. The lower bracket (B) has two sets of air spring mounting holes. Using the
corresponding holes in the lower bracket designated (Figs. 7 & 8), attach the air
spring to the brackets using the 3/8”-24 x 3/4” flat-head socket cap screw (FF).
Torque mounting screws to no more than 20 lb.-ft. (27Nm).
6. Figure 9 shows the driver’s (left) and passenger’s (right) side assemblies.
fig. 7
fig. 8
Passenger’s (right) side air
spring mounting holes shown.
When installing on the air
spring, make sure the bracket
edge facing you is on the fitting
side of the air spring.
The fitting should be on the
top or this side of the air spring
assembly (opposite of flanges
on lower bracket).
The flange should be on the
opposite side of the air line fitting
once the air spring is installed.
Driver’s (left) side air spring
mounting holes shown.
When installing on the air spring,
make sure the bracket edge
facing you is on the fitting side of
the air spring.
fig. 9