6
MN-822
LoadLifter 5000 Ultimate
ATTACHING THE FRAME UPPER BRACKET
1 . Attach the frame upper brackets, (B
1
) to the frame using M-10 button head screws (P) .
Tighten securely (fig. 5).
ATTACHING THE UPPER BRACKET
1 . Set the assembly onto the axle with the
90° swivel air fitting
pointing inward towards the
center of the truck .
If necessary, jack up the chassis to gain clearance to set the assembly into position.
2 . Align the slots in the frame upper bracket and bellow upper bracket . Attach the two with
the 3/8” carriage bolts (Q), flat washer (I) and nyloc nut (H) (fig. 6).
3 . Push the top of the air spring forward or backward and align the upper and lower bracket
so they are parallel .
3/8” Carriage
bolt (Q)
Frame upper
bracket (B
1
)
Flat washer (I)
Bellow upper
bracket (B
2
)
Nyloc nut (H)
fig. 6
NOTE
fig. 5a
fig. 5b
M-10 Button
head screws (P)
Frame
Jounce
bumper
bracket
M-10 Button
head screws (P)
Upper bracket
(B
1
)
4WD
2WD
Содержание 88295
Страница 2: ...2 MN 822 LoadLifter 5000 Ultimate...
