background image

14

MN-822

LoadLifter 5000 Ultimate

Choosing the Right On-Board Air Compressor System

Add an on-board air compressor sytem to inflate and deflate your air 

springs with the touch of a button — from inside or outside of the 
vehicle .

•  For convenient, on-the-go control of your air springs, add an Air Lift on-board air 

compressor system . 

•  Air Lift on-board air compressor systems eliminate the search for gas stations that have 

a working compressor, saving you time, energy and money . 

•  All systems include a compressor, controller and all parts needed for easy installation .

1.  Choose  single  or  dual  path  inflation  (see  

illustrations at right)

2 .  Choose wireless or analog control

•  

Wireless:

 Control your air springs from 

inside or outside the vehicle . Easiest 
installation - no wires to the cab .

•  

Analog:

 In-cab control of your air springs . 

Economically priced . 

3 .   Choose heavy or standard duty compressor

 • 

Standard duty:

 A standard duty compressor 

will work well for most customers who use 
their system on an intermittent basis . 

 • 

Heavy duty: 

For daily use, consider 

the  heavy  duty  compressor  -  it  inflates 

faster and more quietly than the standard 
compressor .

Visit 

www .airliftcompany .com

 for more detailed 

info on compressor systems .

 

Single path systems

 Two springs will 

inflate at the same time. Good for loads 

that are evenly distributed from left-to-
right or front-to-back.

Dual path systems

 Air springs are 

controlled separately to allow for different 
air pressure from side-to-side. Perfect for 
uneven or top-heavy loads.

W I R E L E S S

DUAL PATH

SINGLE PATH

A N A L O G

DEFLATE

RIGHT

DEFLATE

LEFT

INFLATE

BOTH

WirelessAIR

 

TM

WirelessONE

 

TM

LoadCONTROLLER

 

TM

Dual

Single

LoadCONTROLLER

 

TM

DEFLATE

BOTH

INFLATE

BOTH

•  Easy installation
•  Includes heavy 

duty compressor

Compact, 
economically priced 
control. 

Compact, 
economically priced 
control. 

•  Easy installation
•  Includes standard 

duty compressor

P/N Standard Duty Compressor 
25850; P/N Heavy Duty mpressor 25854

P/N Standard Duty Compressor 
25852; P/N Heavy Duty Compressor 25856

P/N 25870

P/N 72000

Содержание 88295





















Отзывы: