Air innovations 99H0360-10, Инструкция по установке, эксплуатации и обслуживанию, Страница: 55 / 85

55
Additional Remote Interface:
Prior to adding an additional remote interface to the system, you will have to change setting 30 on the first
control to give it a different address. Refer back to page
60 for instructions on how to access the interface
Settings, and get to Setting 30 (shown on page 65).
Controller Specification
Application WG only, single stage cooling or heating
Humidification
Programmable No
Change over Auto or manual, Fan ON or AUTO
Color Black (only)
User interface Touch screen
Auto defrost control Yes, with Serving temp option
Connection Communicating – RJ-9 cable
Wireless-to-base communication range
40’ line of site
Wireless-to-base channels 12
Remote sensors Yes, wired or wireless
Temperature adjustment 34 to 97 Deg F (1 to 36 Deg C)
Temperature tolerance +/- 2 Deg F (+/- 1.1 Deg C)
Humidity adjustment 2% to 93% RH
Humidity tolerance +/- 10% RH
System temperature diagnostics Not Available
Alarms
High temp, low temp.
High humidity, low humidity.
High pressure fault.
Condensate, Defrost and Communication error