Air innovations 99H0360-10, Инструкция по установке, эксплуатации и обслуживанию, Страница: 54 / 85

54
IMPORTANT
Wireless installation may result in limited communication range and connectivity issues depending upon
building construction and distance between Wine Guardian unit and Remote Interface Controller and/or
Remote Sensors.
IMPORTANT
Whenever possible we strongly suggest wiring the Remote Interface Controller directly to the Wine Guardian
unit to avoid periodic battery changes and uninterrupted service.
Installing the Thermostat and Communication Cable
The Wine Guardian Wireless-to-base Remote Interface Controller is a
combination temperature and humidity controller with single stage
cooling, heating and humidity control. Its capacitive touch screen
incorporates an on/off switch, adjustment arrows and settings buttons for
ease of use and programming. The controller can be installed one of two
ways:
Wired (recommended)
– wired directly to the Wine Guardian unit through an RJ-9 communication
cable. 50’ (15.25 meters) of control cable is included with each controller with longer lengths available as an
option.
Wirelessly -
connects wirelessly to the Wine Guardian unit by Radio Frequency connectivity through one
of twelve selectable channels.
The Wine Guardian Wireless-to-base Remote Interface Controller is a configurable device that can be fine-
tuned through a series of individual settings. The controller incorporates eight (8) key temperature, humidity
and system alarm points. Remote alarm indication is possible through terminal point connections at our main
control board.
In most applications, the remote interface controller will be mounted within the wine cellar. The remote
interface controller can also be mounted directly outside of the wine cellar or in any other room of the home
or building. When mounted outside of the wine cellar, a remote sensor kit or a second wireless remote
interface must be purchased and installed within the wine cellar.
IMPORTANT
Regardless of wired or wireless each, Wine guardian System can have a maximum of two (2) Remote Interface
Controllers and three (3) Remote Sensors.