AIO DRN-STN, Руководство пользователя, Страница: 17 / 28

16
System integration
Connecting the housing cables
1) Plug the 10 pin connector of the Housing User Interface cable (H1) to the Chassis PCB, outside
the chassis ! Make sure you plug it in the right way, it fits only in one orientation !
2) Plug the 4 pin female connector of the Housing Molex cable (H2) to the male connector of the
Chassis PCB (outside the chassis !).
3) Plug the main Power Connector of the housing (H3) into the socket of the Power Supply Unit.
Note: in case the Power Supply Unit has an on/off switch, make sure you switch it on (for
safety please check the PSU manual).
Please read the manual of your motherboard/add-on cards before you connect the cables of
the DRN-STN to the motherboard/add-on card(s).
4) Plug the USB2.0 connectors (H4, round cables ) to the motherboard.
5) Plug the USB3.0 connectors (H5, flat cables ) to the motherboard.
6) Plug the LAN connector (H6) to the motherboard.
7) Plug the DVI connector (H7) to the motherboard/graphics card.
8) Plug the Audio In (H8, pink) connector to the motherboard.
9) Plug the Audio Out (H9, green) connector to the motherboard.
H2 H1 H7 H3 H9 H8 H5 H6 H4