Aimco SPC-P21225Q, Инструкция по эксплуатации

Страница: 5 / 20

5
that may be suitable for one tool,
may become hazardous when
used on another tool.
Service
● Tool service must be per-
formed only by qualified repair
personnel.
Service or mainte-
nance performed by unqualified
personnel could result in a risk of
injury.
● When servicing an AIMCO Sig-
nature Series Precision Clutch
tool it is important to use
AIMCO Signature Series parts
and all work should be under-
taken by a qualified AIMCO
Signature Series Authorized
Technician.
Use of unauthor-
ized parts or work performed by
a non-authorized technician will
void warranty and may create a
risk of damage to the tool, risk of
electric shock, or injury to a user.
Battery Charger
● Caution: To reduce risk of injury,
charge only the authorized batter-
ies. Other types of batteries may
burst, causing personal injury and
damage.
●
● Do not allow anything to cover or
clog the charger vents.
● Do not expose charger to rain,
snow, or wet conditions.
● To reduce the risk of damage to
electric plug and cord, pull by
plug rather than cord when dis-
connecting charger.
● Use of an attachment not recom-
mended or sold by the manufac-
turer may result in a risk of fire,
electric shock, or injury to per-
sons.
Additional Safety Rules
● Make sure cord for charger is
located so that it will not be
stepped on, tripped on, tripped
over, or otherwise subjected to
damage or stress.
● Do not abuse the power cord. Nev-
er use the cord to carry the charger.
Keep cord away from heat, oil, wa-
ter, sharp edges, or moving parts.
Replace damaged cords immedi-
ately.
● Do not operate charger if it has
been damaged in any way. Take it
to a qualified service center for re-
pair.
● To reduce risk of electric shock,
unplug charger from outlet before
attempting any maintenance or
cleaning. Turning off controls will
not reduce this risk.
● Do not disassemble charger or bat-
tery cartridge. Take it to a qualified
service center when repair is re-
quired. Incorrect reassembly may
result in a risk of electric shock or
fire.
Battery Pack
● Do not charge battery pack when
temperature is below 0°C (32°F)
or above 40°C (104°F).
● Do not attempt to use a step-
down transformer, an engine gen-
erator, or DC power receptacle.
● Do not short the battery pack: Do
not touch the terminals with any
conductive material. Avoid storing
battery cartridge in a container
with other metal objects such as
nails, coins, paper clips, etc.
● Do not expose battery cartridge
to water or rain. A battery short
can cause large current flow,
overheating, possible burns, and
even a breakdown.
● Do not store the machine and
battery pack in locations where
the temperature may reach or
exceed 50°C (122°F).