Aimco SPC-P21225Q, Инструкция по эксплуатации

Страница: 4 / 20

4
Work Area Safety
● Keep your work area clean
and well lit.
Cluttered benches
and dark areas invite accidents.
● Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
liquids, gases, or dust.
Power
tools create sparks which may
ignite the dust or fumes.
● Keep bystanders, children,
and visitors away while oper-
ating a power tool.
Distrac-
tions can cause you to lose con-
trol.
Personal Safety
● Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use tool while tired or under
the influence of drugs, alcohol,
or medication.
A moment of in-
attention while operating power
tools may result in serious person-
al injury.
● Dress properly. Do not wear
loose clothing or jewelry. Con-
tain long hair. Keep your hair,
clothing, and gloves away from
moving parts.
Loose clothes,
jewelry, or long hair can be caught
in moving parts.
● Do not overreach. Keep proper
footing and balance at all
times.
Proper footing and bal-
ance enables better control on
the tool in unexpected situations.
General Safety Rules
● Use safety equipment. Always
wear eye protection.
Dust
mask, non-skid safety shoes,
hard hat, or hearing protection
must be used for appropriate
conditions.
Tool Use and Care
● Use clamps or other practical
ways to secure and support
the work piece to a stable plat-
form.
Holding the work piece
by hand or against your body is
unstable and may lead to loss of
control.
● Do not force tools. Use the
correct tool for your applica-
tion.
The correct tool will do
the job better and safer at the
rate for which it is designed.
● Do not use tool if switch does
not turn it on or off.
Any tool
that cannot be controlled with the
switch is dangerous and must be
repaired.
● Store idle tools out of reach of
children and other untrained
persons.
Tools are dangerous
in the hands of untrained users.
● Check for misalignment or
binding of moving parts,
breakage of parts, and any
other condition that may affect
the tool operation. If damaged,
have the tool serviced before
using.
Many accidents are
caused by poorly maintained
tools.
● Use only Signature Series rec-
ommended accessories for
your model tool.
Accessories
WARNING! READ ALL INSTRUCTIONS . Always observe the safety
regulations applicable in your country to reduce the risk of fire, electric shock,
and personal injury. Understand the following safety instructions before
attempting to operate this product. Always wear eye protection when working
with power tools. Keep these instructions in a safe place.
SAVE THESE INSTRUCTIONS