Aimco SPC-P21225Q, Инструкция по эксплуатации

Страница: 7 / 20

7
This product has been carefully
inspected prior to leaving the facto-
ry. It should provide you with years
of satisfying service under normal
operating conditions. Do not, how-
ever, force the tool to perform out-
side its design parameters. Such
usage will void the warranty.
1. Slide battery into the bottom of
the housing handle until a click
sound occurs. Do not force bat-
tery: It should slide easily into
place with nominal force. Any
difficulty doing so indicates in-
correct alignment.
2. Tool speed is preset to the max-
imum range of the tool. With an
SPC-2PGM External Program-
ming Module (optional accesso-
ry), tool speeds may be reset to
a lower speed within the range
of the tool.
3. Select a proper size drive bit and
insert it into the quick change
holder. Pull forward on the quick
change holder while inserting the
drive bit and release when bit is
seated correctly. Verify secure
seating prior to operation of the
tool.
4. Depress the trigger to engage
the LED light and start the tool.
5. When the pre-set torque is
reached, the tool’s precision
clutch will shut off the tool auto-
matically.
Operations
WARNING! Read the in-
struction manual before op-
erating the tool. Always wear
safety glasses or face
shields when operating this
product. Failure to do so can
result in injury.
Check for damage to tool, parts, or
accessories that may have oc-
curred during transport. Take time
to thoroughly read and understand
this manual prior to operation.
This tool kit contains:
1 - 18V Cordless Shut-Off
Precision Clutch Screwdriver
1 - 18V Li-Ion Battery Pack
1 - Torque Adjustment Tool
1 - Instruction Manual
1. To connect battery, line up the
tracks and attach the battery
pack. Slide toward the battery
pack until it locks into position
with a click.
2. To remove the battery pack,
press the red button on the top of
the battery pack and release the
battery
Assembly
2. RELEASE
1. PRESS
SLIDE