Aim HPM 300, Руководство пользователя и информация о гарантии

Страница: 16 / 31

AIM Hybrid Pulse MIG Welder -HPM-350-HD
A IM MIG OWNER’S MANUAL Rev. 2019 :
| 16
Cleaning
Clean the top of your battery with a cloth or brush and a solution of baking soda and water.
Do
not allow cleaning solution to get inside the battery. Keep the battery cabinet clean and dry.
Charging
Use the charger attached to the machine, this charger is designed to not over charge the
battery.
If other charging equipment is used please refer to the charger and battery
manufactures’ recommendations to ensure compatibility. Fully charge your battery after each
use.
Storage
➢
Fully charge battery before storing
➢
Store in a cool dry location, indoors or under cover
➢
If storing for long periods (greater than one month) disconnect battery from
machine
➢
Batteries will self-discharge and should be fully charged every 4-6 weeks
➢
Fully charge battery when removed from storage before using
➢
Avoid direct exposure to heat sources, batteries self-discharge faster in hot weather.
➢
Do not allow battery to freeze. Batteries that are not fully charged can freeze during
cold weather.
Battery Recycling
97% of a lead acid battery can be recycled. When it is time to replace your battery
properly dispose of the old one at a licensed battery recycler and help keep the
environment clean.
Material Safety Data Sheet
The MSDS sheet for your battery is attached to this manual.