Aim HPM 300, Руководство пользователя и информация о гарантии

Страница: 12 / 31

AIM Hybrid Pulse MIG Welder -HPM-350-HD
A IM MIG OWNER’S MANUAL Rev. 2019 :
| QUICK REFERENCE 12
QUICK REFERENCE
OPERATIONS & CARE INSTRUCTIONS
CHARGING
It is recommended that the machine be plugged into a 110V circuit when not in use, in
order to keep the batteries charged, for optimum power. The charging system will not
overcharge and will prolong the life of your batteries. It is preferred that this machine
be plugged into an 110V circuit during any welding procedure.
BATTERY ONLY OPERATION
An important feature of the AIM MIG Welding Station is the ability to produce high
quality welds on battery power alone. The duty cycle for battery welding will vary over a
large range based on work piece thickness, metal alloy, battery condition. For the best
result, start with the battery at or near full charge.
BATTERY CONDITION
The batteries, when provided from the factory are high quality commercial grade
automotive style batteries. See charging instructions above for maintaining the battery
charge state. The batteries should also be inspected periodically (monthly) for tightness
of connections, swelling of the case and leakage. Batteries that show any signs of
distress should be replaced or serviced by a qualified technician. Eye protection, rubber
gloves and other personal protective equipment must be used when servicing the
batteries. The battery MSDS is included with this manual and should be reviewed with
all personnel to be using the welder.
CLEANING
The welder should be kept clean by wiping with a dust cloth. Internal components can
be blown off with low pressure (inert) compressed air.
Do Not Pressure Wash the AIM
MIG Welding Station ! Damage to the machine will occur and there is a potential for
electrical shock injury to nearby personnel.