Aim HPM 300, Руководство пользователя и информация о гарантии

Страница: 15 / 31

AIM Hybrid Pulse MIG Welder -HPM-350-HD
A IM MIG OWNER’S MANUAL Rev. 2019 :
| BATTERY CARE AND MAINTENANCE 15
BATTERY CARE AND MAINTENANCE
Note: This machine is equipped with maintenance free batteries.
Equipment needed
➢
Gloves and Goggles
➢
Insulated wrench
➢
Baking soda
➢
Terminal protector spray
➢
Voltmeter
➢
Discharge tester (if available)
Safety
➢
Always wear protective clothing, goggles and gloves when handling batteries
➢
Do not smoke or allow open flames near batteries
➢
Avoid skin contact with battery electrolyte
➢
Use insulated wrenches and tool to avoid shorting batteries
➢
In case of contact with electrolyte flush with water immediately, seek medical
treatment
➢
Charge batteries in ventilated area
➢
Always keep your machine and battery upright.
➢
Do not allow a battery to freeze, do not attempt to charge a frozen battery
➢
Avoid charging at temperatures over 120 degrees F.
Battery Connections
Faulty connections can lead to poor performance and property damage, meltdown or fire. Do
not change the cable size that your machine was equipped with at the factory. Tighten battery
connections properly using an insulated wrench. Use terminal protection to prevent corrosion.
Battery Ventilation
Do not block or cover ventilation panels. Always charge your machines battery in a properly
vented area away from open flame or other ignition source.
Inspection
Periodically inspect your battery. The battery case must not be swollen or damage, replace the
battery if physical damage is evident. Clean battery top and terminal connections if needed.
Check batter connections and cables; tighten connections if necessary and replace any worn or
damaged cables.