Aim HPM 300, Руководство пользователя и информация о гарантии

Страница: 11 / 31

AIM Hybrid Pulse MIG Welder -HPM-350-HD
A IM MIG OWNER’S MANUAL Rev. 2019 :
| WELDER SETTING GUIDLINES 11
WELDER SETTING GUIDLINES
Note: The tables below our general guidelines for setting the welder prior to
welding; Actual setting may vary based on many factors, such as; Ambient
temperature and humidity, battery condition, work piece preparation and
position, operator preference and technique etc.
Figure #5 WELDER SETTING TABLES-STEEL/ALUMINUM/SILICON BRONZE
Wire Type Wire Technician AIM HPM-300
Shielding Gas Diameter Control Material Thickness
and Flow Rate (inch) Settings 1/2 in 3/8 in 5/16 in 1/4 in 3/16 in 1/8 in 10 ga 14 ga 16 ga 18 ga 20 ga 22 ga 24 ga
0.023 Power
Feed Speed
Mild Steel 0.030 Power X X 10.5 9 8 7.5 7 6.5 6 5.5 X
75% Ar Feed Speed X X 80% 45% 35% 30% 20% 15% 15% 10% X
25% CO2 0.035 Power 9.5 8.5 8 7 7 6 6 6 6 5.5 X X X
20 cfh Feed Speed 50% 35% 30% 25% 20% 15% 15% 15% 15% 10% X XX
X
0.045 Power 9.5 9 8 7.5 7 6 X X X X X X X
Feed Speed 25% 15% 15% 10% 10% 5% X X X X X X X
0.030 Power
Stainless Steel Feed Speed
HeAr/CO2 0.035 Power 9 8.5 8 7.5 7 6.5 6
20 cfh Feed Speed 45% 40% 35% 30% 25% 20% 20%
Aluminum 0.045 Power 10 9 8 7.5 6.5 5.5
Argon 20 cfh Feed Speed 65% 65% 65% 65% 55% 40%
Feed Speed
Silicon Bronze 0.030 Power 7 6.5 6 5
Argon Feed Speed 65% 55% 50% 45%
20 cfh 0.035 Power
Feed Speed