background image

 

 

VII. Safe Operation and Maintenance 

Do not connect relay, extension cord or adaptor with this machine. 

Otherwise, fire, electric shock and heating can be caused. 

Do not place it near to equipments give heat such as furnace and heater. 

Otherwise, the resin may be melted and causes fire. 

Do not use this dehumidifier in places with direct sunlight or exposed to wind and 

rain. 

This machine is for indoor use only. 

When there is any abnormity (smell of burnt), please shut off the machine and 

unload the power  cord. 

Otherwise, fire, electric shock and new failures may be caused. 

Do not use this dehumidificr in places exposed to chemicals. 

The chemicals and solvent in the air may bring adverse effect to the machine and 

result in leakage in water tank. 

If the machine is spared for a long time, please unload the power cord. 

When clearing the machine, stop it first and unload the power cord. 

Otherwise, human injury may be caused. 

During continuous drainage, please place the drain pipe appropriately for smooth 

drainage. 

If  there  is  any  possibility  that  temperature  around  pipe  may  result  in  icing, 

continuous water drain is not allowed. 

Do not repair, disassemble or alternate  the machine  without authorization so as 

to avoid fire or electric shock accidents; 

Please place the machine in firm places; 

If the machine falls down, the water in water tank may leak out and damages stuff 

around and results in creepage and cause fire or electric shock accidents; 

Knacks to extend the service life of air purification filter mesh:  . 

If to be spared for a long time, keep the air purification  filter mesh in plastic bag 

and save hermetically. 

Do not use dehumidifier in places that may be exposed to water. 

There may be creepage if there is water and result in fire or electric shock. 

Please  use  proper  switch.  Otherwise,  fire  or  electric  shock  accidents  may  be 

caused. Do not damage or alternate the power cord. 

Do not place heavy things on power cord or heat up or pull forcefully the power 

cord,  otherwise  power  cord  may  be  damaged  and  causes  fire  or  electric  shock 
accidents. 

Please connect the power cord firmly with the switch. 

 If the power cord is loose, there may be risk of electric  shock. 

Do not stop operation of dehumidifier by pulling out the power cord. 

Содержание AD-1500B













Отзывы: