6
X. Operation Notices
1. When moving the machine. do not incline the machine for over 45° to avoid
damaging the compressor.
2. Temperature for operation of this machine is 5-38oC
3. When it is operating, the compressor gives off heat when it works, and
ambient temperature may raise by 1-3oC . Such phenomenon is normal and is safe to
use. When ambient temperature is below 10°C and absolute humidity is relatively
low, there is no need to use dehumidifier.
4.The air inlet and outlet must be away from the wall for at least 10 cm in order
not to impair the dehumidification effect.
5. Working environment shall be as airproof as possible to maximize
dehumidification effect.
6. Dust on the air purification filter mesh may impair its effect or even cause
failure. Please clear regularly for at least once a month. If there is much dust in the
environment, it must be cleared once a week or once a day. Pull does the front panel,
clear the filter mesh. Tap the filter mesh slightly or eliminate the dust by vacuum
cleaner or place the mesh in warm water (<40oC and add appropriate neutral scour)
and brush and then wash with clear water and dry it.
Direct sunlight or baking shall be avoided to prevent deformation.
XI. Instruction on Code Failure
This dehumidifier is able to automatically judge failure. If there is any lailure,
there will be failure code displayed on the humidity display window.
Failure display
Problem
E1
Temperature defrost sensor failure
E2, E3
Ambient humidity/Temp sensor failure, if failure of humidity, it
displays E2; if failure of temp, it display E3
E8
Compressor protection
