ahlmann AS 210, Руководство по эксплуатации

Страница: 16 / 116

S220/S221/S230/S231/Z200 1-10
1 Safety Regulations
1.6.1.3 In the case of sparking over, the driver must bring
the machine out of the danger area by lifting or lowering the
attachments or by swivelling away or driving the machine
out of the danger area. If this is not possible then the
following rules must be observed:
- Do not leave the driver’s cabin!
- Warn persons standing near the machine not to approach
or touch the machine!
- Give immediate instructions to have the power cut off!
- Leave the machine only when it is sure that the electricity
in the damaged / contacted power line is switched off so
that the line is dead!
1.6.1.4 Work on the electrical system or on the operating
system may only be carried out by a skilled electrician or
by personnel instructed or supervised by such a trained
electrician according to electrotechnical regulations.
1.6.1.5 The electrical system of the machine must be
checked/inspected at regular intervals. Any defects, e.g.
loose connections or scorched cabling, must be elimina-
ted immediately.
1.6.1.6 The main battery switch must be disconnected
before inspection, maintenance or repair of machine parts
and components so that they are not under power.
1.6.1.7 Electric welding operations may only be per-
formed if the main battery switch has been removed.
1.6.2 Hydraulics
1.6.2.1 Only experts with special expertise and expe-
rience may carry out work on the hydraulic system!
1.6.2.2 All pipelines, hoses and screw connections must
be checked regularly for leakages and visible damage!
Immediately repair such defects! Spurting hydraulic oil
may cause injuries and fire.
1.6.2.3 Those hydraulic system segments which are to
be opened must be depressurised before commencement
of the repair work according to the assembly group descrip-
tion!
1.6.2.4 The hydraulic pipelines must be correctly laid and
connected! Do not mix up the connections. Spare parts
must meet the technical requirements of the manufacturer.
Original spare parts ensure the fulfilment of these require-
ments.
1.6.2.5 The factory settings of hydraulic components
(e.g. the maximum permissible speed of the axial piston
engine) must not be altered. Any adjustment will render the
warranty invalid.
1.6.3 Noise
Sound protection equipment must be in the protective
position during operation of the machine.