The cyclic measuring operation is started by pressing the
START/
STOP
key; the
´START´ arrow should light up continuously. If a peripheral device is con-
nected, the measured values are output cyclically and the ´COM´ arrow should
appear. There is a wide variety of output formats available (see Section 6.3.3).
For the associated printouts please refer to the Manual Section 6.6.1. With the
“S” option the measured values are saved and the ´MEM´ arrow lights up
To start a cyclic measuring point scan:
key:
(
cycle programmed
)
START/STOP
To stop automatic measuring point scanning press the START/STOP key
again. On the data logger (“S” option) the current measured values are saved
again. The ´START´, ´COM´, and ´MEM´ lights go out again..
To stop a cyclic measuring point scan : key:
START/STOP
6.3.3 Output formats for measured value lists
Both for manual and for cyclic measuring point scans (see Sections 6.3.1/2) the
measured values are output as measured value lists in a wide variety of output
formats (see Manual, Sections 6.5.5, 6.6.1). There is the standard format in
which all the measured values are listed one below the other; there is also the
column format listing them next to one another; this printout is clear, easy-to-
understand, and space-saving. For this latter format the printer is switched
over automatically to compressed character mode. There is also the table for-
mat which is intended for further processing using spreadsheet programs (see
Manual, Section 6.1).
The output format is indicated in the baud rate function ´
BR
´ by means of a letter
placed between the output channel ´
U
´ and the baud rate.
Format
Printout
Display
List
Measured values are listed one
below the other
U 9 6 0 0 B
R
"n" = next to one another Measured values are listed in ad-
jacent columns
U n 9 6 0 0 B
R
"t" =
table
Measured values are listed in ta-
ble format
U t 9 6 0 0 B
R
To change these settings the output format must first of all be selected by
pressing the
PROG
key and then set, as usual, by pressing the keys
▲▼
...
Pro-
gramming is terminated by pressing the keys
PROG, ESC
, or
PROG, PROG
30
ALMEMO
2390-5
Measuring operations
Содержание ALMEMO 2390-5
Страница 59: ...Your contact partners ALMEMO 2390 5 59 Appendix...
Страница 60: ...60 ALMEMO 2390 5 Appendix...
