Starting and stopping with start date and time-of-day, and end date and
time-of-day
A measuring series can be started and stopped automatically at specified ti-
mes. The start date and time-of-day and end date and time-of-day can be free-
ly programmed - providing these functions have been activated (see Section
5.2). If no particular date has been programmed, the measuring operation will
be performed every day within the set period. The current time-of-day must ha-
ve been programmed.
START time-of-day function ´
ST
´
Select by pressing the
FUNCTION
key
Enter the time-of-day in the format
hh:mm:ss
(s. 5.4):
START daTE function ´
SD
´
Select by pressing the
FUNCTION
key
Enter the date in the format
tt:mm:jj
(s. 5.4):
End time-of-day and end date are programmed in the same way in the End ti-
me-of-day function ´ET´ and End DATE function ´ED´ (see Section 5.4).
Other ways of starting and stopping measured value recording, i.e. by means of
limit values, external triggering, or interface command, are described in the Ma-
nual, Section 6.6.
6.5.3 Measured value output
Memory content can be output to a printer or computer as often as required and
in any output format from the range possible with online data output (see Secti-
on 9.2); (see also Manual, Section 6.6.1).
In the memory freE function ´
MF
´
Start measured value output by the key:
MANU/
During memory output the amount of memory still to
be output is calculated and shown in the display in KB
with function abbreviation ´MO´.
Memory output function ´
MO
´: output in kB
0
1
3.5
MO
To abort memory output press the key:
START/STOP
0 7:3 0:0 0
ST
0 1.1 2.9 9
SD
0
3
0
.
5
MF
ALMEMO
2390-5
39
Measuring operations
Содержание ALMEMO 2390-5
Страница 59: ...Your contact partners ALMEMO 2390 5 59 Appendix...
Страница 60: ...60 ALMEMO 2390 5 Appendix...
