AGROSE ATT-1000, Руководство пользователя

Страница: 17 / 38

13

NEVER USE THE CARDAN TRANSMISSION IF THE FOLLOWING PROTECTIVE COVERS
ARE MISSING:

TRACTOR POWER TAKE-OFF PROTECTIVE COVER

CARDAN SHAFT PROTECTIVE COVER

FIXED PROTECTIVE COVER ON THE PUMP SHAFT
4.4. PUMP
When using the pump scrupulously observe the instructions in the enclosed handbook supplied by the
manufacturer.
The pump can be identified by the ratings plate on the same; the main data on the
pressure and delivery are easy to find on this plate.
Normally the pumps mustn’t exceed 540 RPM; a higher speed won’t improve
performance but there is a risk of compromising the life and safety of the pump.
There is a safety valve on the pump, calibrated to prevent overpressure. Don’t
tamper with this valve for any reason and don’t block or obstruct the pipes
connected to it in any way.
4.5. SUCTION FILTER
An efficient filter lets the Sprayer work properly.
You should periodically check that the filter cartridge is clean,
this check should be done more often if the reare impurities in
the liquid. To inspect the filter cartridge wear rubber acid-pro
of gloves as the liquid in the filter can come into contact with
your hands when you open the filter.
Don’t perform this operation with the pump running as the
depression produced blocks the cover preventing the
removal.
Before removing the cover of the filter, make sure that the
same is isolated from the tubing by unscrewing the relevant rear
valve (PICTURE N°9).
After washing the cartridge, reassemble the covermaking sure you connect the same to the circuit again,
using the valves described above in the opposite order.
WARNING :
Don’t disperse the washing residues in the environment!!
PICTURE 8
PICTURE 9
When maneuvering, disengage the PTO and keep the tire from
touching the
sprayer’s tongue, otherwise this will damage the sprayer’s
transmission.
NOTE:
Before cutting the PTO shaft tubes, check for all the possibilities of adjustment
on both
tractor’s drawbar and sprayer’s tongue. Make sure the hitch pin is mounted
with cotter pin.