AGROSE ATT-1000, Руководство пользователя

Страница: 15 / 38

11
4. TRACTOR COUPLING
Refer to the tractor user manual before performing
this operation.
Turn off the tractor diesel engine, apply the parking
brake and remove the starting key from the contact
keyhole before coupling the PTO shaft to the tractor
PTO.
Try to couple the PTO shaft to the tractor PTO. If
necessary to adjust the PTO shaft length, use the
PPEs specific to this operation such as: goggles,
gloves, boots, etc.
When coupling the PTO shaft to the tractor, make
sure that the safety pin is securely locked.
After length adjustment, clean and lubricate the PTO shaft components. Wear safety gloves for this
operation too.
Never use a PTO shaft not fitted with shroud.
Do not perform adaptations for reutilization of the PTO shaft.
Fasten the PTO shaft covering safety chain to the tractor; that chain will prevent the PTO shaft covering
from turning together with the PTO shaft.
Before actuating the tractor PTO, fill the main reservoir It must have a 3-point elevator suitable for safely
supporting the weight of the atomizer. Check this by consulting the table of a
llowed fittings Tables N° 3A-
3B
WARNING : make sure there are no persons or things near the atomizer before starting the machine and
while you are using it.
4.1. THREE-POINT COUPLING
a) We recommend carefully checking that the tractor is suitable for supporting the weight of the fully
loaded Sprayer safely. The total weight of the Sprayer with all of its accessories and fittings is indicated
on the name plate in PICTURE. 1 and also (in the version with the maximum fittings allowed ) in Tables
N° 3A-3B
For verification use the formula shown here.
Non-observance can result in a very dangerous situation as the tractor will
löse steering sensitivity and
can tip over when driving up hill or over bumps.
b) Check the diameter of the elevator coupling pins. If necessary position the double diameter pins
correctly; there are also appropriate adapter bushes available.
c) Adjust the length of the third point tie-rod correctly so the sprayer is perfectly vertical in normal working
position.
d) Check for the presence of the safety pins that stop the arms of the tractor jumping off the connecting
pins.
4.2. HYDRAULIC CONNECTION TO THE DISTRIBUTORS
Machines that need a hydraulic connection to drive the movements of the robotic head / radial cannon
are equipped
with 1/2", “Push-Pull”, quick-fit male couplings. You can connect the pipes by simply pushing
them in, making sure you:
Do so only with the engine turned off;
Lower any tools connected to the elevator of the tractor;
Carefully clean the two parts that will be coupled
WARNING: The hydraulic cylinders used are
the “Double Effect” type.
Consult the use and maintenance manual of the tractor.