Agromatic ESR-NK Series, Инструкция по установке и эксплуатации, Страница: 70 / 98

6.2 Electrical connection 6 Electronic position controller ESR-NK (option)
64 Actuators NK and VK, Position Controller ESR-NK
Programming the left end position
1. Move to the left end position by press-
ing button L .
If the end position is overrun, the actuator
must be moved far enough in reverse direc-
tion using button
R .
Then repeat step 1.
2. Press button SET .
► Blue LED flashes.
3. Press button L within 3s.
► Blue LED goes out.
The left end position is now programmed.
Programming the right end position
1. Move to the right end position by press-
ing button R .
If the end position is overrun, the actuator
must be moved far enough in reverse direc-
tion using button
L .
Then repeat step 1.
2. Press button SET .
► Blue LED flashes.
3. Press button R within 3s.
► Blue LED goes out.
The right end position is now programmed.