Agromatic ESR-NK Series, Инструкция по установке и эксплуатации, Страница: 39 / 98

5 Assembly 5.2 Installation
Actuators NK and VK, Position Controller ESR-NK 33
Cam adjustment, controller programming
6. Adjust control cam NL (see section “5.4 Setting the position switches” ).
If a position controller is installed, also:
Program the left end position of the controller ESR-NK (see section
“6.2.7 Programming” ).
7. Electrically move the linear actuator until the top position of the valve is
reached.
8. Adjust control cam NR (see section “5.4 Setting the position switches” ).
If a position controller is installed, also:
Program the right end position of the controller ESR-NK (see section
“6.2.7 Programming” ).
Fig. 5.5: Series VK – installation and adjustment