Agromatic ESR-NK Series, Инструкция по установке и эксплуатации, Страница: 47 / 98

5 Assembly 5.3 Electrical connection
Actuators NK and VK, Position Controller ESR-NK 41
5.3.4 Schematic diagram for direct current
CCW rotation:
Apply DC voltage to terminals L+
and L−.
CW rotation:
Apply DC voltage to terminals L
a
+
and L
a
− .
Fig. 5.11: Schematic diagram for direct current
5.3.5 AC schematic diagram with service switch (option)
The service switch can be used to
move the actuator irrespective of
the control signals present at
terminals 2 and 3.
Hand = manual operation
Rechts = right-hand operation
(CW rotation)
Links = left-hand operation
(CCW rotation)
Fig. 5.12: AC schematic diagram with service switch (option)
5.3.6 AC schematic diagram for parallel operation (option)
If several actuators are to be con-
trolled by a common switching
contact, every actuator must be
equipped with a relay for parallel
operation.
K1: relay for parallel operation
Fig. 5.13: AC schematic diagram for parallel operation (option)