Agria Cyclone 5900, Перевод оригинальной инструкции по эксплуатации

Страница: 66 / 88

5 Maintenance and Repair
66 Hydrostatic implement carrier agria 5900 Cyclone
General
Before each start-up check for escaping fuel and
oil and eliminate the cause.
- agria-Service -
Regularly check nuts and bolts for tightness and
retighten if necessary.
At least yearly and after cleaning:
Lubricate all sliding or moving parts (such as
speed regulating lever, hand lever bearing, etc.)
with bio lubricating grease or bio lubricating oil.
Cleaning
Machine
Clean thoroughly with water immediately after
each use.
Never expose electrical cables and components
(switches, easy-control control unit, safety valve,
control module) to a direct water jet.
At the end, lubricate all sliding parts with bio-
based lubricating oil or with bio-based lubricating
grease.
In addition lubricate the lubrication points on the
machine immediately after cleaning with a high
pressure cleaner, and put the machine briefly into
operation to press out the penetrated water.
To protect the bearings against penetrating dirt,
sap and water, there shall be a grease collar at
the bearing points.
Engine
Only clean the engine with a cloth. Do not spray
with water, as water could enter the ignition and
fuel system and cause malfunctions.