Agria 5300 Скачать руководство пользователя страница 53

Страница: 53 / 68

5 Maintenance and Repair

Meadow mower

agria 5300

Storage

If the machine is out of operation for an extended period:

(1)

Clean

. Touch up the paint.

(2)

Spray

all bare parts

and

cutter bar

with bio corrosion-inhibiting oil.

(3)

Preserve the engine.

Petrol engine

•

Completely drain the fuel outdoors into a suitable container.

Petrol is highly flammable and explosive under certain conditions!

Never smoke in the working area. Stay away from naked flames and

sparks.

Alternatively

fill the fuel tank completely and add a fuel stabilizer (Agria no.

799 09) to the fuel

- Observe the operation instructions!

Let the engine run for approximately 10

minutes.

•

Change engine oil.

•

Fill a teaspoon (approximately 0.03 l) of engine oil into the sparking-plug hole.

Slowly crank the engine.

•

Reinstall the sparking plug and set the piston with the cable-pull starter to com-

pression (slowly pull at the starter handle until you can feel resistance). The

valves are now closed.

•

Slowly crank the engine every 2...3 weeks (sparking-plug connector removed!)

and set the piston back to compression.

(4)

Driving wheels

Jack up the machine such that the wheels

are not on the ground. A flat pneumatic tyre

is unserviceable within a very short time

when it is under load on the ground.

(5)

Shelter the machine

To avoid heavy corrosion:

•

Protect against weather influence

•

Do not store in

- damp rooms

- synthetic fertiliser stores

- stables and adjacent rooms

(6)

Cover the machine

Cover the machine with a cloth or something

similar

Содержание 5300





































































Результаты поиска

Содержание 5300

Отзывы:

Agria 5300, Руководство по эксплуатации, Страница: 53 / 68

Результаты поиска

Содержание 5300

Отзывы: