Agria 5300 Скачать руководство пользователя страница 36

Страница: 36 / 68

4 Commissioning and Operation

Meadow mower

agria 5300

If there is a risk of slipping on a slope, have a

second person who holds the machine with a bar

or a rope. The second person must stand above

the machine at a safe distance from the hazard

zone.
Work across the slope along contour lines if

possible. If possible, turn the machine in uphill

direction.
When mowing/mulching, only work uphill to clear

the headland.

Never work downhill. The machine could

start slipping.

Never try to stop a slipping ma-

chine. The machine is too heavy. You can not

hold it. If possible, steer the machine across the

slope. Release the safety lever to activate the

safety circuit.

Turn the machine only in uphill direc-

tion!

Mowing flat surfaces

Mowing on slopes

Parking the machine on a slope

The machine rolls downhill when

you set the wheel switching to "O" on a

slope. Always position the machine such

that it is across the slope, and/or leave

wheel switching ON.

The machine rolls downhill at in-

creasing speed when wheel switching is

not switched on!
To move downhill, follow a diagonal

route across he slope.

Starting the engine on a slope

When you start the engine, leave

the wheel drive switched on -> braking

effect.

Содержание 5300





































































Результаты поиска

Содержание 5300

Отзывы:

Agria 5300, Руководство по эксплуатации, Страница: 36 / 68

Результаты поиска

Содержание 5300

Отзывы: