Agria 5300 Скачать руководство пользователя страница 18

Страница: 18 / 68

3 Devices and Operating Elements

Meadow mower

agria 5300

3 Devices and Operating Elements

The meadow mower

agria 5300

is suit-

able to be used for the maintenance of

green areas and parks as well as in

agriculture and forestry for grass and

meadow mowing and winter service.
When using the machine on public roads

– and during transport – the national

road traffic regulations of the relevant

country must be complied with (marking,

lighting, etc.).
The implements approved in the Agria

sales list are available.

Engine

The

four-stoke petrol engine

is to be

used with standard petrol (see chapter

Startup, page 27).
During the first 20 hours of operation

(running-in period) do not use the engine

at full power.
The rule of never using the engine at a

higher speed than necessary for the

work in hand applies even after the

running-in period

High speeds are detrimental to

all engines and significantly reduce

their service life. This especially ap-

plies for no-load operation! Over-

revving the engine (letting it roar) can

result in immediate damage.

Cooling

The engine is cooled with an air blower.

Keep the fan grille at the cable-pull

starter and the cooling fins of the cylin-

der free of dirt and aspirated plant de-

bris.

Idling

Always ensure that the engine idle

speed is adjusted correctly. With speed

regulating lever at idling, the engine

should continue running smoothly.

- agria-Service -

Air filter

The air filter cleans the aspirated air. A

contaminated filter reduces the engine

output.

Ignition system

The petrol engine is equipped with a

contactless electronic ignition system.

We recommend that any necessary

inspections are carried out by a skilled

person only.

Содержание 5300





































































Результаты поиска

Содержание 5300

Отзывы:

Agria 5300, Руководство по эксплуатации, Страница: 18 / 68

Результаты поиска

Содержание 5300

Отзывы: