Agria 5300 Скачать руководство пользователя страница 41

Страница: 41 / 68

5 Maintenance and Repair

Meadow mower

agria 5300

•

Remove the

fan housing

after every

100

operating hours or

at least yearly

, ideally

before the season. Clean the cooling fins on

cylinder and cylinder head, and the deflector

plates and the fan wheel that are necessary

for air circulation.

- agria-Service -

Exhaust system and speed governor

Regularly check the exhaust system (B/9), gov-

ernor lever, linkage and governor springs for

soiling and plant debris and clean with a brush or

compressed air if necessary.

Danger of fire -

due to dirty exhaust system!

Check before each start-up.
Replace damaged exhaust parts.

Handle hot engine components with caution!

Idle speed

Always ensure that the engine idle speed is adjusted correctly. With speed regulat-

ing lever at idling, the engine should continue running smoothly.

- agria-Service -

All further maintenance and care of the engine

Engine operating

instructions

Содержание 5300





































































Результаты поиска

Содержание 5300

Отзывы:

Agria 5300, Руководство по эксплуатации, Страница: 41 / 68

Результаты поиска

Содержание 5300

Отзывы: