Agria 5300 Скачать руководство пользователя страница 12

Страница: 12 / 68

1 Safety Instructions

Meadow mower

agria 5300

There is a risk of injuries when you at-

tach an implement. Take special care.
Attach an implement in accordance with

the regulations and only at the specified

fixtures.
Always switch off the working tools dur-

ing a transport ride or when you drive to

adjacent working areas.
Secure machine and implement against

unauthorized use and rolling away when

you leave it. If necessary, install

transport or safety equipment, and put it

in protective position.

Mowing equipment

When handled improperly, the sharp

edges of the mower knives can cause

significant injuries. Always wear protec-

tive gloves when you work on the

knives.
Ensure that the screwing movements

are away from the cutting edges when

you replace a knife and loosen or secure

the knife driver.
Wear protective goggles and protective

gloves when you grind the knives.

Ballast

Always attach ballast properly at the

attachment points provided.

Snow pusher

Attach snow pusher correctly! Wear non-

slip shoes.
When swivelling the snow pusher, mind

pinching and shearing points.
Ensure that the working speed is

adapted to the prevailing working condi-

tions. Failure to do so could injure the

driver by the force of the impact when

the vehicle hits an obstacle.

Maintenance and cleaning

Only trained specialist personnel, who

can carry out professional maintenance

and repair, may carry out this work.

Do not carry out maintenance and clean-

ing with the engine running.
When working on the engine always

remove the ignition key (if present) and

also the spark plug connector in the

case of petrol engines.
Protective devices and tools that are

subject to wear and tear must be regu-

larly inspected and replaced if neces-

sary!
Damaged cutting tools must be re-

placed!
When replacing cutting tools use suita-

ble tools and protective gloves.
Do not carry out repair work such as

welding, grinding, drilling, etc. on struc-

tural, safety-relevant parts (such as

steering bar, tractor hitches, etc.)!
Keep the machine and attachments

clean, to avoid the risk of fire.
Regularly check nuts and bolts for tight-

ness and retighten if necessary.
After maintenance and cleaning, ensure

that the protective devices are re-

installed and properly adjusted!
Only use genuine Agria spare parts.
Carry out a functional and safety test

after completing the work.

Storage

Never store the machine in rooms with

open heating.
Do not park the machine in closed

rooms with fuel left in the tank. Fuel

vapours are hazardous.

Engine, fuel and oil

Do not run the engine in a closed room.

There is a high risk of poisoning! There-

fore always replace damaged exhaust

parts.

Содержание 5300





































































Результаты поиска

Содержание 5300

Отзывы:

Agria 5300, Руководство по эксплуатации, Страница: 12 / 68

Результаты поиска

Содержание 5300

Отзывы: