Agria 5300 Скачать руководство пользователя страница 52

Страница: 52 / 68

5 Maintenance and Repair

Meadow mower

agria 5300

General

Before each start-up check for escaping fuel and

oil and eliminate the cause.

- agria-Service -

Regularly check nuts and bolts for tightness and

retighten if necessary.

At least

yearly

and after cleaning:

Lubricate all sliding or moving parts (such as

speed regulating lever, hand lever bearing, etc.)

with bio lubricating grease or bio lubricating oil.

Cleaning

Machine

Clean thoroughly with water immediately after

each use.
Do not expose electric cables and components

to direct water jets.
Afterwards, lubricate all sliding parts with organic

lubricating oil or with organic lubricating grease.

In addition, lubricate the lubrication points on the

machine immediately after cleaning with a high

pressure cleaner, and put the machine briefly

into operation to press out penetrated water.
To protect the bearings against penetrating dirt,

sap and water, there shall be a grease collar at

the bearing points.

Engine

Only clean the engine with a cloth. Do not spray

with water, as water could enter the ignition and

fuel system and cause malfunctions.

Содержание 5300





































































Результаты поиска

Содержание 5300

Отзывы:

Agria 5300, Руководство по эксплуатации, Страница: 52 / 68

Результаты поиска

Содержание 5300

Отзывы: