Agilent Technologies N4963A Скачать руководство пользователя страница 3

Страница: 3 / 81

Notices

any form or by any means (including electronic

storage and retrieval or translation into a

foreign language) without prior agreement and

written consent from Agilent Technologies,

Inc. as governed by United States and

international copyright laws.

Manual Part Number

N4963-91021

Edition

Fifth edition, April 2014
Agilent Technologies, Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen, Germany

For Assistance and Support

http://www.agilent.com/find/assist

Limitation of Warranty

The foregoing warranty shall not apply to

defects resulting from improper or inadequate

maintenance by Buyer, Buyer-supplied

software or interfacing, unauthorized

modification or misuse, operation outside of

the environmental specifications for the

product, or improper site preparation or

maintenance. No other warranty is expressed

or implied. Agilent Technologies specifically

disclaims the implied warranties of

Merchantability and Fitness for a Particular

Purpose.

Warranty

The material contained in this document is

provided “as is,” and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted by

applicable law, Agilent disclaims all warranties,

either express or implied, with regard to this

manual and any information contained herein,

including but not limited to the implied

warranties of merchantability and fitness for a

particular purpose. Agilent shall not be liable

for errors or for incidental or consequential

damages in connection with the furnishing,

use, or performance of this document or of any

information contained herein. Should Agilent

and the user have a separate written

agreement with warranty terms covering the

material in this document that conflict with

these terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accordance

with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or

subcontract, Software is delivered and licensed

as “Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995), or

as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer software”

as defined in FAR 52.227-19 (June 1987) or any

equivalent agency regulation or contract

clause. Use, duplication or disclosure of

Software is subject to Agilent Technologies’

standard commercial license terms, and non-

DOD Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR 52.227-

19(c)(1-2) (June 1987). U.S. Government users

will receive no greater than Limited Rights as

defined in FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It calls

attention to an operating procedure, practice,

or the like that, if not correctly performed or

adhered to, could result in damage to the

product or loss of important data. Do not

proceed beyond a CAUTION notice until the

indicated conditions are fully understood and

met.

A WARNING notice denotes a hazard. It calls

attention to an operating procedure, practice,

or the like that, if not correctly performed or

adhered to, could result in personal injury or

death. Do not proceed beyond a WARNING

notice until the indicated conditions are fully

understood and met.

This Manual:http://www.manuallib.com/agilent/n4963a-clock-synthesizer-user-guide.html

Содержание N4963A


















































































Результаты поиска

Содержание N4963A

Отзывы:

Бренды по названию

Популярные бренды

Agilent Technologies N4963A, Руководство пользователя

Результаты поиска

Содержание N4963A

Отзывы:

Бренды по названию

Популярные бренды