Agilent Technologies FieldFox MW N9913A, Руководство по обслуживанию

Страница: 139 / 156

N9927-90003 7-45
FieldFox Analyzer Repair and Replacement Procedures
Post-Repair Procedures
Manual Checks and Procedures
Manual Check of Keyboard
Check that each key works properly. Check that the keyboard backlight LEDs come on when a key is
pressed.
Manual Check of LCD
Press Service (7) > Display , then use Display Colors and Brightness keys to exercise the display.
Check for even brightness in the LCD backlight.
Manual Check of RPG Operation
Activate a marker and use the RPG to move the marker.
Load Instrument Serial Number into the A5 System Board
Instructions for this process may be accessed via the “Load instrument serial number into System Board”
link at
agilent.com/find/fieldfox2 .
Install Firmware from SD Card
A specially configured SD card must be used when the flash memory on the A6 SOM board is new or
when the A6 SOM board memory has become corrupted.
Instructions for creating and using the SD card are available at the “SD card for installing firmware” link
at
agilent.com/find/fieldfox2 .
Compare Serial Numbers
Compare the serial number stored in the instrument memory with the serial number tag on the back of
the instrument.
To access the stored serial number, press:
System (7) > Service Diagnostics > System Information
Check Sound
See “Checking Display Brightness and Sound” on page 4-7 .
Check Time and Date
Check the current time and date. Press
System > System Configuration > More > Date and Time
.
It may be necessary to adjust the time zone as well.
See http://na.tm.agilent.com/fieldfox/service/rtc_info.htm
for restrictions and details for setting time and date.
Re-Install Options
See the “Service Related User Operations” section of Chapter 8 for information on re-installing options.