manualshive.com logo in svg

Agilent Technologies E4406A VSA Series, Руководство программиста, Страница: 258 / 420

Поделиться
Скачать
Agilent Technologies E4406A VSA Series Скачать руководство пользователя страница 258

258

Chapter 5

Language Reference

MMEMory Subsystem

MMEMory Subsystem

The purpose of the MMEMory subsystem is to provide access to mass
storage devices such as internal or external disk drives. Any part of
memory that is treated as a device will be in the MMEMory subsystem.

If mass storage is not specified in the filename, the default mass storage
specified in the MSIS command will be used.

Memory Available or In-Use

:MMEMory:FREE?

Queries the memory for optional application modes, like option BAH
(GSM mode) or option BAE (NADC/PDC mode). The query returns two
values, the memory currently in use and the free memory. The sum of
the two values is the total instrument memory.

History:

Revision A.03.00 or later

Front Panel
Access:

System, File System

Select a Memory Device

:MMEMory:MSIS A|[C]

:MMEMory:MSIS?

Selects a default mass storage device which is used by all MMEMory
commands.

The query returns the default mass storage device.

A is the 3.5 inch floppy disk

C is the internal memory

Example:

MMEM:MSIS C

History:

Added in version A.04.00 and later

Front Panel
Access:

Print Setup, Print To File, File Location

Содержание E4406A VSA Series





































































































































































































































































































































































































































Отзывы:

Нет отзывов