Agilent Technologies E364 A Series, Руководство пользователя

Страница: 89 / 207

Chapter 4 Remote Interface Reference
State Storage Commands
88
State Storage Commands
The power supply has five storage locations in non-volatile memory to store
power supply states. The locations are numbered 1 through 5. You can also
assign a name to each of the locations (1 through 5) for use from the front panel.
*SAV { 1 | 2 | 3 | 4 | 5 }
Store (Save) the present state of the power supply to the specified location.
Any state previously stored in the same location is overwritten (no error is
generated).
• A power-on reset (
*RST
command) does not affect the configurations
stored in memory. Once a state is stored, it remains until it is overwritten
or specifically deleted.
• The state storage feature ‘‘remembers’’ the states or values of the following
commands:
CURR, CURR:STEP, CURR:TRIG, OUTP, OUTP:REL, TRIG:DEL,
TRIG:SOUR, VOLT, VOLT:STEP, VOLT:TRIG, VOLT:PROT,
VOLT:PROT:STAT,
and
VOLT:RANG
*RCL { 1 | 2 | 3 | 4 | 5 }
Recall the power supply state stored in the specified storage location. When
shipped from the factory, storage locations ‘‘1’’ through ‘‘5’’ are empty.
Note:
DISP {OFF|ON
} can be stored and recalled in remote interface mode
only. Going to local mode automatically sets the display state to ON.
MEMory:STATe
:NAME { 1 | 2 | 3 | 4 | 5} , <quoted name>
:NAME? { 1 | 2 | 3 | 4 | 5}
Assign a name to the specified storage location. From the remote interface,
you can only recall a stored state using a number (1 through 5). The
:NAME?
query returns a quoted string containing the name currently assigned to the
specified storage location. If the specified location has no name assigned, an
empty string (‘‘ ’’) is returned. The name can contain up to 11 characters. The
first character can be a alphanumeric. Blank spaces are not allowed. An error
is generated if you specify a name with more than 9 characters. See ‘‘
State
Storage
’’, on page 55 for more information. An example is shown below.
‘‘
MEM:STATE:NAME 1,
‘
P15V_TEST
’ ’’
If you do not specify a name (note that the name parameter is optional), no
name is assigned to that state. This provides a way to erase a name (however,
the stored state is not deleted).