Agilent Technologies Agilent G3215A, Руководство пользователя, Страница: 26 / 42

2 Installation
26 Mass Spec Bench User Guide
6
Make sure that the sight glass faces the opening of the door so that the oil
level can be monitored. Make sure that the power cords for the pumps are
not crimped or under the metal oil drip tray.
7
Attach the exhaust hoses and foreline hoses to the pumps.
a
Remove the pre-cut foam pieces from the hose ports in the Mass Spec
Bench. Save these pieces for a later step.
b Route the fore line hoses through one of the ports.
c
If a second pump is being used, repeat the process.
Figure 17 Dual MS40 Pump orientation
WA R N I N G
To avoid possible injury if you are setting up an existing LC/MS or GC/MS system
on the Mass Spec Bench:
• The pump can be hot. Use gloves when moving it or wait until it is cool.
• The pump is heavy. For your safety, use two people to move it together.