Agilent Technologies 82357B, Руководство пользователя

Страница: 20 / 59

8 82357B User’s Guide
1 Installing the Agilent 82357B
4
Observe the LEDs on the 82357B for at least 10 seconds.
See
Chapter 2 , “Using the Agilent 82357B” for a
description of the normal LED sequence during an initial
installation of the 82357B.
a
Initially, only the red FAIL LED should be ON. After a
few seconds, all three LEDs should be ON. When all
three LEDs are ON, this shows that the 82357B has
been successfully installed.
b
If all three LEDs are not ON after 10 seconds and all
Windows Plug- and- Play Manager activity has ceased,
STOP . See Chapter 3 , “Troubleshooting the Agilent
82357B” for diagnostics information.
N O T E
For Windows Vista
®
and Windows 7, there will be no Windows Plug and
Play Manager Sequence because once 82357B is initially plugged into a
USB port it will automatically install the driver.