Agilent Technologies 654xA Series Скачать руководство пользователя

Страница: 12 / 76

General Information

List of Options (continued)

Option Description Used

with

Agilent

Series

908

Rack mount kit (Agilent 5062-3974)

Rack mount kit (Agilent 5062-3977)

909

Rack mount kit with handles (Agilent 5062-3975)

Rack mount kit with handles (Agilent 5062-3983)

Accessories

Agilent

No.

Description

1494-0058

Heavy duty slide mount kit for Series 657xA

1494-0059

Standard slide mount kit for Series 655xA

1494-0060

Standard slide mount kit for Series 654xA

Description

These units form a family of unipolar, analog programmable power supplies organized as follows:

Family Power

Models

Series 654xA

200 W

Agilent 6541A, 6542A, 6543A 6544A, 6545A

Series 655xA

500 W

Agilent 6551A, 6552A, 6553A, 6554A, 6555A

Series 657xA

2000 W

Agilent 6571A, 6572A, 6573A, 6574A, 6575A

This family is similar in performance to the corresponding GPIB system power supplies.

Analog Family

Corresponding GPIB Family

Agilent 654xA

Agilent 664xA

Agilent 655xA

Agilent 665xA

Agilent 657xA

Agilent 667xA

Each power supply is programmable locally from the front panel or remotely via a rear-panel analog control port.
Operational features include:

•

Constant voltage (CV) or constant current (CC) output over the rated output range.

•

Built-in overvoltage (OV), overcurrent (OC), and overtemperature (OT) protection.

•

Automatic turn-on selftest.

•

Pushbutton nonvolatile storage and recall of up to 5 operating states.

•

Local or remote sensing of output voltage.

•

Auto-parallel operation for increased total current.

•

Series operation for increased total voltage.

•

Analog input for remote programming of voltage and current.

•

Voltage output for external monitoring of output current.

•

User calibration from the front panel.

Front Panel Programming

The front panel has both rotary (RPG) and keypad controls for setting the output voltage and current. The panel display
provides digital readouts of the output voltage and current. Other front panel controls permit:

Содержание 654xA Series













































































Результаты поиска

Содержание 654xA Series

Отзывы:

Похожие инструкции для 654xA Series

Бренды по названию

Популярные бренды

Agilent Technologies 654xA Series, Руководство по эксплуатации

Результаты поиска

Содержание 654xA Series

Отзывы:

Похожие инструкции для 654xA Series

Бренды по названию

Популярные бренды