Agilent Technologies 41501A, Руководство пользователя

Страница: 106 / 246

3-22 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
Connecting to Network
If You Use a Windows PC
3. Click
Performance and Maintenance
, then
System
to open the System Properties
dialog box.
4. Click the
Computer Name
tab.
5. Check Full computer name and Workgroup or Domain. Or set them properly.
Step 3.
Network Protocols
1. In the Control Panel, click
Network and Internet Connections
, then
Network
Connections
.
2. Double-click
Local Area Connection
to open the Local Area Connection Status
dialog box.
3. Click
Properties
to open the Local Area Connection Properties dialog box.
If Internet Protocol (TCP/IP) is not installed, click
Install
. After that, step
through the setup instruction to install the TCP/IP.
4. Highlight
Internet Protocol (TCP/IP)
.
Step 4.
TCP/IP Properties
1. Click
Properties
to open the Internet Protocol (TCP/IP) Properties dialog box.
2. If you are going to use the DHCP server, click “
Obtain an IP address
automatically
”. You do not need to set the network parameters.
Otherwise, click “
Use the following IP address
” and set the network parameters.
3. Click
OK
.
4. Click
OK
.
5. Click
Close
.
Step 5.
Network Connection Check
1. Click
Start
,
All Programs
,
Accessories
, and
Command Prompt
to open the
Command Prompt window.
2. Ping a computer or a device on the network. If, for example, the IP address of
the device is 192.168.1.99, execute C:\> ping 192.168.1.99.
If any error occurs, perform these instructions again.