Agilent Technologies 2200 TapeStation, Руководство пользователя

Страница: 8 / 72

8 2200 TapeStation
1
Introduction to the 2200 TapeStation System
Overview of the System
Agilent 2200 TapeStation Components
Lid: The 2200 TapeStation lid must be closed each time the instrument
controller software is initialized, and whilst the instrument is in operation.
LED: The LED will illuminate once the instrument is on. When the LED is
flashing slowly, the instrument is in use and the lid should not be opened,
rapid flashing indicates that the TapeStation requires some attention.
Sample Block: There are 2 sample blocks provided that can either hold 0.2 mL sample
tube strips or a 96 well plate.
Tip Holder: The tip holder can accommodate up to 16 TapeStation loading tips at any
one time.
ScreenTape: The tape must be placed into the holder with the barcode towards the
front of the instrument, facing towards the right.
USB Socket: The USB connector is inserted into the USB socket to link the laptop to the
2200 TapeStation.
Power-cable socket: The power cable must be connected to the 2200 TapeStation and the
relevant mains electricity outlet.