Agilent Technologies 2200 TapeStation, Руководство пользователя

Страница: 47 / 72

2200 TapeStation 47
Maintenance
5
Changing the Needle
Change the needle cartridge
1 Remove the sample plate and tip holder.
2 Remove the foil tab from the top of the needle cartridge.
3
Insert the needle cartridge into the tip holder space, using the label for
orientation. The cartridge should be placed so that the label faces to the
right, and the printed arrow points to the front of the TapeStation.
4 Close the lid.
5 Go to Needle Change on the Controller software toolbar and select Run .
Parts required # p/n Description
1 G2960-60062 Needle cartridge (for use in single pump systems)
For use with product numbers ST007, ST008 and ST009
OR 1 G2960-60063 Needle cartridge (for use in dual pump systems)
For use with product numbers ST017, ST019, ST010, G2960A,
G2961A, G2964AA, G2965AA and G2966AA
N O T E
New needles cartridges can be ordered at any time from Agilent Technologies by
contacting your local sales agent.
For details on correct needle cartridge for your TapeStation model, refer to Table 2 on
page 45.
N O T E
Care must be taken to keep the needle cartridge level after removing the foil tab
Needle cartridge
Front
Rear
TapeStation