manualshive.com logo in svg

Agilent Technologies 2000 X, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 2000 X Скачать руководство пользователя страница 4

4

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

 

An MSO lets you debug your mixed- signal designs using analog signals 
and tightly correlated digital signals simultaneously. The 8 digital 
channels have a 1 GSa/s sample rate, with a 50 MHz toggle rate.

• 8.5  inch  WVGA  display.

• Interleaved 2 GSa/s or non- interleaved 1 GSa/s sample rate.

• Interleaved 100 Kpts or non- interleaved 50 Kpts MegaZoom IV memory 

for the fastest waveform update rates, uncompromised.

• All knobs are pushable for making quick selections.

• Trigger types: edge, pulse width, pattern, and video.

• Math waveforms: add, subtract, multiply, and FFT.

• Reference waveforms (2) for comparing with other channel or math 

waveforms.

• Many built- in measurements.

• Built- in license- enabled waveform generator with: sine, square, ramp, 

pulse, DC, noise.

• USB ports make printing, saving and sharing data easy.

• Optional LAN/VGA module for connecting to a network and displaying 

the screen on a different monitor.

• Optional GPIB module.

• A Quick Help system is built into the oscilloscope. Press and hold any 

key to display Quick Help. Complete instructions for using the quick 
help system are given in 

“Access the Built- In Quick Help"

on page 40.

For more information about InfiniiVision oscilloscopes, see: 

"www.agilent.com/find/scope"

Содержание 2000 X









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды