P1512137 R3
51
1. Remove all residual material from the hopper and the tube.
2. Stop the machine with the belt lacing inside the tube. This helps prevent the lacing from rusting.
3. Wash the entire conveyor thoroughly using a water hose or pressure washer to remove all dirt, mud, debris,
or residue.
4. Inspect all moving or rotating parts to see if anything has become entangled in them. Remove any entangled
material.
5. Touch up all paint nicks and scratches to prevent rusting.
6. Check tire pressure and inflate. For inflation pressure, refer to
Section 9. – Specifications on page 71
.
7. Inspect the conveyor for cracks, tightness of fittings and fasteners, hydraulic hose cracks (if applicable). Have
required repairs performed to replace worn or damaged components.
8. Store in an area that is dry, level, free of debris, and away from human activity. Store inside if possible.
9. Cover the motor with waterproof tarpaulin if stored outside to protect from weather.
10. Chock wheels.
11. Support intake on blocks to eliminate prolonged contact with the ground.
Æ
12.
PTO Models:
Clean and lightly lubricate the spline on the PTO driveline. Cover the PTO driveline with a
plastic bag to protect it from the weather and place it in the transport saddle.
13. Lower the conveyor fully for storage.
S-DRIVE STANDARD CONVEYOR – PORTABLE GRAIN BELT CONVEYOR