42
4454C EN 2013-05-14
Workflow
CR 35-X D
IGITIZER
Workflow
The workflow for identifying cassettes and digitizing image plates depends on
the configuration of your system.
In the
interchangeable configuration
a cassette is uniquely identified by the
identification data in the cassette chip. Therefore, you must first identify the
cassette via the ID Station with ID Tablet before you can digitize the image
plate. Refer to
‘Reading an image plate in the interchangeable configuration’
on
page
In the
dedicated configuration
the identification data are transmitted from
the ID Station to the dedicated CR 35-X via the network. Therefore, the CR 35-X
can digitize the image plate while you are entering the identification data on
the ID Station. Refer to
‘Reading an image plate in the dedicated configuration’
page
Note: An exception are emergency image plates which you can digitize
without having identified the cassette. The unidentified emergency image
plate will be given default ID data. Refer to
plate in the interchangeable configuration’
on page
.
Содержание CR 35-X
