AGFA 6007/110 Скачать руководство пользователя страница 25

Страница: 25 / 89

Local regulations

This product complies with local radio frequency regulations in the country or

region where you purchased the product. Note that it cannot be used in any

areas other than the country or region of its purchase.
The radio frequency channel (5 GHz) configured for indoor use may not be

usable in outdoor areas, depending on local radio frequency regulations.
If you would like to add other equipment to the environment where this

product is installed, or to use this product in other environments, please

consult your sales representative or local dealer for details.

Specific absorption rate (SAR)

WARNING:

The SAR limit set by FCC is 2W/kg (for EU and Japan) and

1.6W/kg (for USA and Korea). This equipment complies with

FCC&CE SAR regulation. The front side of a detector should be

used for image acquisition.

• OET Bulletin 65, Supplement C (edition 01-01)
• EN 62311:2008
• EN 62209-1:2006
• EN 62209-2:2010

DX-D 60C, DX-D 60G | Introduction to the DR Detector |

0294B EN 20190221 1131

Содержание 6007/110


























































































Результаты поиска

Содержание 6007/110

Отзывы:

AGFA 6007/110, Руководство пользователя, Страница: 25 / 89

Результаты поиска

Содержание 6007/110

Отзывы: