
System Control Unit
The System Control Unit is connected to the DR Detector via the DR Detector
cable.
The System Control Unit is connected to the X-ray generator to synchronize
the exposure, in a configuration with X-ray generator synchronization.
The System Control Unit is connected to the workstation via wired network.
1
2
1
2
1.
Power switch
2.
Status indicator
• Blinking green: starting up
• Green: ready
• Blue: communicating to the detector
Figure 3: System Control Unit (SCU) and Mini System Control Unit (Mini
SCU)
WARNING:
Do not use the System Control Unit within the patient’s vicinity.
Related Links
on page 81
on page 82
Safety directions for the power supply
on page 55
16
| DX-D 60C, DX-D 60G | Introduction to the DR Detector
0294B EN 20190221 1131