AGFA 5410/050 Скачать руководство пользователя страница 56

Страница: 56 / 75

Executing the exposure

Take a safe distance from the X-ray tube.

CAUTION:

Excessive user or operator radiation exposure. Always keep a

distance of at least 2 meters from the focal spot and X-ray

beam, protect body and do not expose hands, arms or other

parts of the body to the primary beam.

On the handswitch or on the remote control, press the exposure button to

execute the exposure.
The exposure is sent to NX.

WARNING:

During exposure ionizing radiation is emitted by the X-ray

system. To indicate the presence of ionizing radiation, the

radiation indicator on the control console lights up.

CAUTION:

Do not select another thumbnail until the preview image is

visible in the active thumbnail. The acquired image may be

linked to the wrong exposure.

In NX:

• While the acquisition is ongoing, the X-ray on indicator is displayed on the

software console. The led beacon light lights up yellow.

• The image is acquired from the DR Detector and displayed in the

thumbnail.

• The software console disappears.
• If collimation is applied, the image is automatically cropped at the

collimation borders.

• The actual X-ray exposure parameters are shown in the Image Detail pane.

Performing a quality control

In NX:

Select the image on which quality control is to be performed.

Prepare the image for diagnosis by using e.g. L/R markers or annotations.

If the image is OK, send the image to a hardcopy printer and/or PACS

(Picture Archiving and Communication System).

Note

If you use a wired network, NX can only send images if

the network cable is plugged in.

| DX-D 100 | Getting started

0187K EN 20191024 1609

Содержание 5410/050












































































Результаты поиска

Содержание 5410/050

Отзывы:

Бренды по названию

Популярные бренды

AGFA 5410/050, Руководство пользователя

Результаты поиска

Содержание 5410/050

Отзывы:

Бренды по названию

Популярные бренды